Search
Close this search box.

Nord One SE NC1200 Dual Mono Stereo Power Amplifier

Starting from

£2,295.00

Nord One SE NC1200 Dual Mono Stereo Power Amplifier

Starting from

£2,295.00

Nord One NC1200 Dual Mono Stereo Power is our flagship model stereo amplifier. Consisting of  separate amp module, PSU, Input buffer.

We think the new NC1200 is a significant upgrade over the NC500 and sounds absolutely stunning with greater bass, dynamics, soundstage and is wonderfully musical. It sound a bigger more mature amplifier.

Using onboard NC1200 buffers as standard can be further upgraded and enhanced by specifying our NC1200 REV A buffer same spec as REV D but with connections required for the NC1200 using Sparkos discrete Voltage regulators and choice of  discrete Sparkos 2590 or Sonic Imagery 990 Op Amps. These run in full class A and add greater tonal density for a more tonally rich sound. while improving resolution and soundstage. And elevate the NC1200 amp to a truly very Hi End audio experience.

Comes standard in the SE case for a more solid, beautifully finished and classy looking case. Made in Japan the SE case matches the sonic ability of the amp and also comes with a switchable ON OFF DIM front LED

We use quality RCA and XLR input sockets from Switchcraft in the USA and soldered directly onto buffer board no long input wire. Standard binding posts are 5 way including banana from CHK you will find these gracing the back of the £40K Ultima amplifiers.  The front main switch is finished in brushed stainless steel with an even blue halo LED. Our Nord badge is Aluminum and both this and the switch are neatly rebated. Which sits in our signature 3 parallel lines milled into the front of the case.  And they sit on solid brushed and polished lacquered isolation feet. Combined they produce a simple yet aesthetically pleasing look.

Moving inside the amplifier we build with a combination of quality and experience of laying out amplifiers in order to achieve ultimate performance. We balance this with ease of build in order to maintain lower prices without compromising quality. Vulnerable wire connections are double shrink sleeved to ensure long term reliability. We have recently moved to combine inputs directly to the buffer board eliminating long input signal paths.  Buffer boards are soldered using WBT silver solder. All resistors are either 1% or 0.1% tolerance where needed in the audio feedback path. Signal capacitors are ultra quite Wima Polypropylene while power caps are long life Panasonic FR range. Binding posts are connected to buffer board with as short a length of OFC Silver plated Teflon dielectric 14AWG wire. Neotech OCC option. The connections to the binding posts are crimped and soldered to ensure ultimate contact. Our SMPS have virtually zero noise emission’s an example of how this is achieved is attention to detail each power output transistor is individually wrapped in Copper foil shielding. We also pay a great deal of attention to Thermal testing when designing a new amp to ensure they run as cool as possible. Heat is the enemy and will reduce long term reliability.

All our amplifiers perform and offer far better value than any product available from dealers. Even our entry level MP range offer a base line of superb dynamics, amazing soundstage, clarity and sheer addictive musicality. Gone are any hints of the older Class D harsh and thin sound. They sound like the top notch Class A A/B amplifiers. Each amp is built by one individual who is responsible for its internal build quality.

There is no 40% dealer margin, no 40% distribution margin, no advertising or representatives supporting dealers to pay for. You buy direct from the us, the manufacture. We are free to source modules and parts from the very best (suppliers) in the world. Because of our low margins and overheads we can manufacture our amplifiers with the highest quality, expensive and  most reliable products available while keeping the cost low. It’s a winning formula and those that seek and take a leap of faith are truly rewarded with amazing sonic ability. We are passionate about our products and the way we look after you, in the highly unusual event of something going wrong. We loath the term (so called) Customer Service, we have all experienced that! What you get is to be treated as I would wish and expect to be – with directness and fairness, and I promise not to ask “Is their anything else I can help you with today”.

Weight9 kg
Dimensions54 × 50 × 20 cm

SPECIFICATION (per channel)

nc1200 specification nordacoustics uk

 

• 2 x Hypex NCore NC1200 Module

 • 2 x  Hypex SMPS1200A700 Power Supply

• Uses Onboard NC1200 Buffers as Standard (Upgrade to Nord One NC1200 REV A Input Buffer with choice of Sparkos SS2590 or Sonic Imagery 990Enh Op Amps also accepts previous 8 pin Sparkos and Sonic Imagery OP Amps)

• SNR 137dB

• Distortion: THD+N – – 0.004 % 20Hz

• Frequency Response: 0 – 50k Hz +0/-3dB

• Low Distortion: THD+N – – 0.001 % 20Hz

• High Input Impedance 51K

• Input Sensitivity 8ohm 2.52Vrms 10.24dBu

• 26.4 dB Gain

• Ultra High Damping Factor

• High Current Output Max 40A Capable of driving 2ohm

   1200W 2ohm

   700W 4ohm

   400W 8ohm

• Frequency Response: 0 – 50k Hz +0/-3dB

• XLR Balanced Input

• Stereo SE Case W 430mm D 375mm H 100mm

• Weight 9Kg

• 2 Years Warranty

FEATURES & COMPONENTS

isolation feet 768x499 nord acoustic

  • Onboard NC1200 buffer
  • CHK Binding posts
  • Neotech OCC 14AWG solid Copper binding post wire.
  • Solid Aluminum brushed and lacquered Isolation feet
  • Metal Switchcraft XLR’s
  • High quality RCA’s (optional)
  • Front Stainless Steel Blue LED mains switch

 

UPGRADE OPTIONS

  • Nord NC1200 REV A Buffer
  • RCA Input
  • WBT 0703Cu Speaker Binding Posts

Upgrade from Hypex NC1200’s onboard buffer to our NC1200 REV A separate buffer.

Automatically turn on amplifier when your 12V trigger equipped Preamp is turned on.

XLR fitted as standard add switchable RCA-XLR option.

Standard binding posts will accept bananas, spade and bare wire.

Upgrade to 5 year warranty. Covers parts and labour (Return delivery extra after 1 year)

nord amplifier neotech wire

NEOTECH UP-OCC SOLID COPPER 14AWG SPEAKER OUTPUT WIRE

Standard wire is of very high quality OFC with Teflon dielectric. Upgrade to higher quality Neotech solid OCC if you believe in cables!

Shopping Cart