Search
Close this search box.

Nord One MP NC502 5-6 CH Multi Channel Power Amplifier

Starting from

£1,399.00

Nord One MP NC502 5-6 CH Multi Channel Power Amplifier

Starting from

£1,399.00

MP, multi channel power amplifier range based on the Hypex NCXXXMP series of modules. MP stands for “Mains Powered”. The modules are  self contained, has onboard power supply, amp module and input and out put buffers. We have 3 main modules of different power. The NC122MP 75W 8 Ohms    NC252MP 150W 8 Ohms    NC502MP 350W 8 Ohms

Multi Channel amps are controlled by a Nord control board which sequences and mutes channels on start up to avoid inrush currents and start/stop speaker pops.

Each 1 and 2 channel module has its own PSU so regardless of how many Channels are specified, the power and performance never changes.

 

Our Standard case is sourced from Italy and offers a consistent look across the range. We use quality RCA and XLR input sockets from Switchcraft in the USA and soldered directly onto a switchable connection board. Standard binding posts are 5 way including banana.  The front main switch is finished in brushed stainless steel with an even blue halo LED. Our Nord badge is Aluminum and both this and the switch are neatly rebated. Which sits in our 2  parallel lines milled into the front of the case.  And they sit on solid brushed and polished lacquered isolation feet. Combined they produce a simple yet aesthetically pleasing look.

The connections to the binding posts are crimped and soldered to ensure ultimate contact. Our SMPS have virtually zero noise emission’s an example of how this is achieved is attention to detail each power output transistor is individually wrapped in Copper foil shielding. We also pay a great deal of attention to Thermal testing when designing a new amp to ensure they run as cool as possible. Heat is the enemy and will reduce long term reliability.

All our amplifiers perform and offer far better value than any product available from dealers. Even our entry level MP range offer a base line of superb dynamics, amazing soundstage, clarity and sheer addictive musicality. Gone are any hints of the older Class D harsh and thin sound. They sound like the top notch Class A A/B amplifiers. Each amp is built by one individual who is responsible for its internal build quality.

There is no 40% dealer margin, no 40% distribution margin, no advertising or representatives supporting dealers to pay for. You buy direct from the us, the manufacture. We are free to source modules and parts from the very best (suppliers) in the world. Because of our low margins and overheads we can manufacture our amplifiers with the highest quality, expensive and  most reliable products available while keeping the cost low. It’s a winning formula and those that seek and take a leap of faith are truly rewarded with amazing sonic ability. We are passionate about our products and the way we look after you, in the highly unusual event of something going wrong. We loath the term (so called) Customer Service, we have all experienced that! What you get is to be treated as I would wish and expect to be – with directness and fairness, and I promise not to ask “Is their anything else I can help you with today”.

Weight14 kg
Dimensions54 × 50 × 22 cm

SPECIFICATION DIMENSIONS

• Standard 5-6 Case

• 2-3 Hypex NCore NC502MP twin channel Module

• Nord Switchable RCA-XLR input boards

• Auto sensing 100-240V mains input operation

• 0.12W standby operation

• 1500W Main PSU per Module

• 47K Ohms Input Impedance, low output impedance

• THD 0.0018%

• S/N Ratio 124dB

• 26dB Voltage Gain Input Sensitivity 2.3Vrms

• 2 x 350Wrms 8 Ohms

• 2 x 500Wrms 4 Ohms

• 2 x 450Wrms 2 Ohms

• Fully loaded flat frequency response

• 92% efficient

• Case mm W 450 D 410 H 148

• Weight 14Kg

FEATURES & COMPONENTS

  • Nord Micro controller with 12V Trigger
  • Front LED with ON OFF DIM setting
  • 5 way Binding posts
  • Solid Aluminum brushed and lacquered Isolation feet
  • Switchable Metal Switchcraft XLR’s and RCA
  • Front Stainless Steel Blue LED mains switch

UPGRADE OPTIONS

 

  • Rackmount Front
  • Silver plated 14AWG OFC Teflon dielectric binding post wire

Swaps front panel to a 4mm rackmount one and removes the feet.

Upgrade to high quality OFC wire, Add number of channels required

5 year warranty full parts and labour (Return delivery extra after 1 year)

Swaps front panel to a 4mm rackmount one and removes the feet.

Upgrade to high quality OFC wire, Add number of channels required

5 year warranty full parts and labour (Return delivery extra after 1 year)

nord amplifier neotech wire

NEOTECH UP-OCC SOLID COPPER 14AWG SPEAKER OUTPUT WIRE

Standard wire is of very high quality OFC with Teflon dielectric. Upgrade to higher quality Neotech solid OCC if you believe in cables!

Shopping Cart